Back to the main page Back to category Bass Fishing Boats
boat details
2012 Bass Tracker 165 Pro with 4-Stroke 40hp Mercury EFI and Matching Trailer
Estimated price for orientation: 6 500 $
Category: Bass Fishing Boats
Class:
Description Year: 2012 Use: Fresh Water Make: Bass Tracker Engine Type: Single Outboard Model: 165 Pro Engine Make: Mercury Engine Type: Bass Engine Model: 40hp EFI 4-Stroke Length (feet): 16.5 Primary Fuel Type: Gas Beam (feet): 6.5 Fuel Capacity: 6 - 10 Gallons Hull Material: Aluminum For Sale By: Private Seller Trailer: Included
I'm selling a 2012 Pro 165 Bass Tracker bass boat with Lowrance Fishfinder, Motorguide Trolling Motor and Tracker Marine matching trailer. The 10-gallon aerated bow livewell even has a bait bucket holder. The all-welded .100 aluminum Mod V hull, with its wide, stable 54" (1.37 m) bottom, is built as solid as they come.
The Pro 165 is powered by a fuel-saving Mercury® 40hp FourStroke EFI with approx. 53 hours on it. The boat rides on a factory-matched TRACKER trailer. Length: 16' 2"
Beam: 6 ft. 5 in.
Fuel tank capacity: 9
Max load: 875
Standard features:
Comfort, Safety & Convenience
Non-skid bow mat
Fire extinguisher
Bow & stern eyes
Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Battery trays
Safety lanyard
Built-in easy-access fuel tank w/integrated in-cap fuel gauge
Easy-fill fuel tank system
Self-venting fuel fill
Paddle
Safety lanyardConsole
Toggle switches
Lowrance® X50D8 fishfinder w/surface temp. & swivel
Sleek, 1-piece molded console w/tinted windscreen & built-in drink holder
Mercury® control box Construction & Exterior
Welded-in longitudinal stringer systemfor full-length support of the running surface
Heavy-duty box-beam, corner-braced all-aluminum transomwelded in to unitize & strengthen the hull
Injected, expanding hull foamfor extra hull stiffening, flotation & quiet-riding sound insulation
Heavy-duty extruded 1-piece, gunnelfor structural strength & rigidity
Red & Black graphic scheme
All-composite seat frames for long-term durability & resistance to the elements
Marine-grade, cut-pile carpeting throughout
Pressure-treated floors & decks w/limited lifetime warranty
Flush-mount, all-aluminum carpeted compartment lids for structural rigidity, tight fit & long-term durabilityElectrical
Trolling motor receptacle
Abrasion-resistant wire-protective wrap
12V trolling motor harness
Marine-grade, automotive-style fuse panel w/cover
500 GPH (1,892.71 LPH) bilge pump
Interstate® trolling battery and starting battery Interior
Driver & passenger seats w/storage
2 molded fold-down fishing chairs
Secure & stable screw-in fishing seat bases & pedestals
Elevated bow & aft casting decks w/storage
Port side rod holders w/organizer for 4 rods to 8' (2.44 m)Livewell Systems
500 GPH (1,892.71 LPH) aerator/fill pump
Bow 10-gal. aerated livewell w/bait bucket holder
Molded 1-piece construction w/rounded corners to protect your catchPerformance
Aluminum propellerTrailer
EZ lube hubs
Factory-matched, color-coordinated drive-on trailer
All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
Powder-coated steel tubing w/GALVASHIELD® corrosion protection
13" (33.02 cm) tires & wheels w/Silver Metallic powder-coat finish and Spare
Space-saving swing-away tongue
Folding tongue jack w/swivel wheel
Heavy-duty winch w/nylon strap w/bow safety strap
Nylon tie-down straps
Carpeted bunks & fender boards
Outboard motor support
Submersible lightsTrolling Motor12V foot-control trolling motor
Thru-bolted trolling motor mount46lb Motorguide Bow MountThe boat has little to no use. The engine has about 53 hours on it. I do run the boat at least once a month, and at the least, in the driveway on the hose. The batteries are about 2 years old.
On the port side of the hull there is some discoloration where it appears the boat may have rubbed against a dock or tree. I have tried to remove this with acetone / xylene and it will not come off. The blemish is not into the aluminum but has only discolored a small area - approx. 7" x 9" in size. There is also (1) very small tear on the bottom of the bow pedestal seat. These are the only infractions on the boat. The trailer is in good condition. The tires have about 50% worth of tread still on them and the trailer lights are in good working condition. The spare tire is brand new. The bearing buddies have recently been repacked.
This boat is registered in Texas, has a clear title and the trailer tags are good until 10/17. This will be the last time I list this boat until I decide what I'm going to do with it next year. Thanks for looking and feel free to ask questions
Description
| Year: | 2012 | Use: | Fresh Water |
| Make: | Bass Tracker | Engine Type: | Single Outboard |
| Model: | 165 Pro | Engine Make: | Mercury Engine |
| Type: | Bass | Engine Model: | 40hp EFI 4-Stroke |
| Length (feet): | 16.5 | Primary Fuel Type: | Gas |
| Beam (feet): | 6.5 | Fuel Capacity: | 6 - 10 Gallons |
| Hull Material: | Aluminum | For Sale By: | Private Seller |
| Trailer: | Included |
I'm selling a 2012 Pro 165 Bass Tracker bass boat with Lowrance Fishfinder, Motorguide Trolling Motor and Tracker Marine matching trailer. The 10-gallon aerated bow livewell even has a bait bucket holder. The all-welded .100 aluminum Mod V hull, with its wide, stable 54" (1.37 m) bottom, is built as solid as they come.
The Pro 165 is powered by a fuel-saving Mercury® 40hp FourStroke EFI with approx. 53 hours on it. The boat rides on a factory-matched TRACKER trailer. Length: 16' 2"
Beam: 6 ft. 5 in.
Fuel tank capacity: 9
Max load: 875
Standard features:
Comfort, Safety & Convenience
Non-skid bow mat
Fire extinguisher
Bow & stern eyes
Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Battery trays
Safety lanyard
Built-in easy-access fuel tank w/integrated in-cap fuel gauge
Easy-fill fuel tank system
Self-venting fuel fill
Paddle
Safety lanyardConsole
Toggle switches
Lowrance® X50D8 fishfinder w/surface temp. & swivel
Sleek, 1-piece molded console w/tinted windscreen & built-in drink holder
Mercury® control box Construction & Exterior
Welded-in longitudinal stringer systemfor full-length support of the running surface
Heavy-duty box-beam, corner-braced all-aluminum transomwelded in to unitize & strengthen the hull
Injected, expanding hull foamfor extra hull stiffening, flotation & quiet-riding sound insulation
Heavy-duty extruded 1-piece, gunnelfor structural strength & rigidity
Red & Black graphic scheme
All-composite seat frames for long-term durability & resistance to the elements
Marine-grade, cut-pile carpeting throughout
Pressure-treated floors & decks w/limited lifetime warranty
Flush-mount, all-aluminum carpeted compartment lids for structural rigidity, tight fit & long-term durabilityElectrical
Trolling motor receptacle
Abrasion-resistant wire-protective wrap
12V trolling motor harness
Marine-grade, automotive-style fuse panel w/cover
500 GPH (1,892.71 LPH) bilge pump
Interstate® trolling battery and starting battery Interior
Driver & passenger seats w/storage
2 molded fold-down fishing chairs
Secure & stable screw-in fishing seat bases & pedestals
Elevated bow & aft casting decks w/storage
Port side rod holders w/organizer for 4 rods to 8' (2.44 m)Livewell Systems
500 GPH (1,892.71 LPH) aerator/fill pump
Bow 10-gal. aerated livewell w/bait bucket holder
Molded 1-piece construction w/rounded corners to protect your catchPerformance
Aluminum propellerTrailer
EZ lube hubs
Factory-matched, color-coordinated drive-on trailer
All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
Powder-coated steel tubing w/GALVASHIELD® corrosion protection
13" (33.02 cm) tires & wheels w/Silver Metallic powder-coat finish and Spare
Space-saving swing-away tongue
Folding tongue jack w/swivel wheel
Heavy-duty winch w/nylon strap w/bow safety strap
Nylon tie-down straps
Carpeted bunks & fender boards
Outboard motor support
Submersible lightsTrolling Motor12V foot-control trolling motor
Thru-bolted trolling motor mount46lb Motorguide Bow MountThe boat has little to no use. The engine has about 53 hours on it. I do run the boat at least once a month, and at the least, in the driveway on the hose. The batteries are about 2 years old.
On the port side of the hull there is some discoloration where it appears the boat may have rubbed against a dock or tree. I have tried to remove this with acetone / xylene and it will not come off. The blemish is not into the aluminum but has only discolored a small area - approx. 7" x 9" in size. There is also (1) very small tear on the bottom of the bow pedestal seat. These are the only infractions on the boat. The trailer is in good condition. The tires have about 50% worth of tread still on them and the trailer lights are in good working condition. The spare tire is brand new. The bearing buddies have recently been repacked.
This boat is registered in Texas, has a clear title and the trailer tags are good until 10/17. This will be the last time I list this boat until I decide what I'm going to do with it next year. Thanks for looking and feel free to ask questions
The Pro 165 is powered by a fuel-saving Mercury® 40hp FourStroke EFI with approx. 53 hours on it. The boat rides on a factory-matched TRACKER trailer. Length: 16' 2"
Beam: 6 ft. 5 in.
Fuel tank capacity: 9
Max load: 875
Standard features:
Comfort, Safety & Convenience
Non-skid bow mat
Fire extinguisher
Bow & stern eyes
Flotation meets or exceeds NMMA & U.S. Coast Guard requirements
Battery trays
Safety lanyard
Built-in easy-access fuel tank w/integrated in-cap fuel gauge
Easy-fill fuel tank system
Self-venting fuel fill
Paddle
Safety lanyardConsole
Toggle switches
Lowrance® X50D8 fishfinder w/surface temp. & swivel
Sleek, 1-piece molded console w/tinted windscreen & built-in drink holder
Mercury® control box Construction & Exterior
Welded-in longitudinal stringer systemfor full-length support of the running surface
Heavy-duty box-beam, corner-braced all-aluminum transomwelded in to unitize & strengthen the hull
Injected, expanding hull foamfor extra hull stiffening, flotation & quiet-riding sound insulation
Heavy-duty extruded 1-piece, gunnelfor structural strength & rigidity
Red & Black graphic scheme
All-composite seat frames for long-term durability & resistance to the elements
Marine-grade, cut-pile carpeting throughout
Pressure-treated floors & decks w/limited lifetime warranty
Flush-mount, all-aluminum carpeted compartment lids for structural rigidity, tight fit & long-term durabilityElectrical
Trolling motor receptacle
Abrasion-resistant wire-protective wrap
12V trolling motor harness
Marine-grade, automotive-style fuse panel w/cover
500 GPH (1,892.71 LPH) bilge pump
Interstate® trolling battery and starting battery Interior
Driver & passenger seats w/storage
2 molded fold-down fishing chairs
Secure & stable screw-in fishing seat bases & pedestals
Elevated bow & aft casting decks w/storage
Port side rod holders w/organizer for 4 rods to 8' (2.44 m)Livewell Systems
500 GPH (1,892.71 LPH) aerator/fill pump
Bow 10-gal. aerated livewell w/bait bucket holder
Molded 1-piece construction w/rounded corners to protect your catchPerformance
Aluminum propellerTrailer
EZ lube hubs
Factory-matched, color-coordinated drive-on trailer
All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio
Powder-coated steel tubing w/GALVASHIELD® corrosion protection
13" (33.02 cm) tires & wheels w/Silver Metallic powder-coat finish and Spare
Space-saving swing-away tongue
Folding tongue jack w/swivel wheel
Heavy-duty winch w/nylon strap w/bow safety strap
Nylon tie-down straps
Carpeted bunks & fender boards
Outboard motor support
Submersible lightsTrolling Motor12V foot-control trolling motor
Thru-bolted trolling motor mount46lb Motorguide Bow MountThe boat has little to no use. The engine has about 53 hours on it. I do run the boat at least once a month, and at the least, in the driveway on the hose. The batteries are about 2 years old.
On the port side of the hull there is some discoloration where it appears the boat may have rubbed against a dock or tree. I have tried to remove this with acetone / xylene and it will not come off. The blemish is not into the aluminum but has only discolored a small area - approx. 7" x 9" in size. There is also (1) very small tear on the bottom of the bow pedestal seat. These are the only infractions on the boat. The trailer is in good condition. The tires have about 50% worth of tread still on them and the trailer lights are in good working condition. The spare tire is brand new. The bearing buddies have recently been repacked.
This boat is registered in Texas, has a clear title and the trailer tags are good until 10/17. This will be the last time I list this boat until I decide what I'm going to do with it next year. Thanks for looking and feel free to ask questions