Back to the main page Back to category Sailing Boats
boat details
Corby 25 Sailing Yacht - Trailerable sailing boat
Estimated price for orientation: 24 950 $
Category: Sailing Boats
Class:
Description Condition: Used: An item that has been previously used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Year: 2004 Type: Race and Coastal sailing boat Hull Material: GRP Make: Corby Rigging: Bermuda Model: Corby25 Keel: Fin and Lead Bulb Engine Type: Tahatsu 6Hp Electric assist start Length (feet): 25 Primary Fuel Type: Gas Beam (feet): 8 Fuel Capacity (Gallons): Professional Inboard stainless steel tank system
Construction:
Designed by John Corby
Built in 2004
GRP hull deck & superstructure
Deep fin keel with a lead bulb
Spade rudder
Gelcoat finish on the topsides
Underwater profile stripped back, spray primed & hard racing antifouled in August 2016!Mechanics:
6hp Tahatsu long shaft outboard engine (SERVICED ANNUALLY! & NEW IN 2013!)
Electric assist start
New spring assist engine mounting bracket (2015)
When racing, the engine fits neatly beneath bespoke cabin steps onto hull moldings for inboard position. This means the weight distribution is correct for the hull design.
Electrics:
Complete rewire of boat in 2015
2 x switched Leocih MC2 Li-ion lithium 22Ah batteries (new 2015)
LED lighting throughout
LED masthead tri-colour light
LED forward & aft steaming lighits
8 way illuminated waterproof switch panel
USB charge pointTankage:
Custom inboard stainless steel 18 litre fuel tank (installed by fuel specialist with fuel system running to transom)
Fuel tank level gauge
Exterior fuel filling cap on deckRigging:
Z spars aluminium swept back, double spreader mast (new mast step 2015)
Z spars aluminium boom
Rod kicker
Carbon spinnaker pole with improved trip systemCabon bow prodder and tack line fitted for A sail configuration
Dyform standing rigging (new 2015)
Spectra 24:1 backstay which leads to the main sheet position, with single line low friction rings & Harken cam cleats (new 2016)
Masthead backstay crane (new 2015)
Liros XTR jib halyard (new 2015)
Liros XTR jib sheets (new 2015)
Liros XTR spinnaker sheets (new 2015)
Slab reefing
Sails:
Most recent addition;
2016 LITE SKIN tri radial Technique Voile No.1 & No. 3 - (excellent condition including race sail bags)Mainsails;
2 x mainsails
Uk Mc Williams (re-cut 2016) reefing point added (2016)
Goacher battened Dacron with 2 reef points 2007Genoas;
LITE SKIN tri radial Technique Voile No.1 (2016)
LITE SKIN tri radial Technique Voile No. 3 (2016)
1 x UK Mc Williams No. 1 (2010)
1 x Dacron No. 1 (2007)
1 x Laminate No. 3 (2010)
1 x storm jib (unused)Spinnakers;
1 x heavy symmetrical kite
1 x light symmetrical kite1 x medium weight asymmetrical (black) available if required by seperate negotiation
Spinnaker launch bagCockpit boom tent included for overnight comfort
Description
| Condition: | Used: An item that has been previously used. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Year: | 2004 |
| Type: | Race and Coastal sailing boat | Hull Material: | GRP |
| Make: | Corby | Rigging: | Bermuda |
| Model: | Corby25 | Keel: | Fin and Lead Bulb |
| Engine Type: | Tahatsu 6Hp Electric assist start | Length (feet): | 25 |
| Primary Fuel Type: | Gas | Beam (feet): | 8 |
| Fuel Capacity (Gallons): | Professional Inboard stainless steel tank system |
Construction:
Designed by John Corby
Built in 2004
GRP hull deck & superstructure
Deep fin keel with a lead bulb
Spade rudder
Gelcoat finish on the topsides
Underwater profile stripped back, spray primed & hard racing antifouled in August 2016!Mechanics:
6hp Tahatsu long shaft outboard engine (SERVICED ANNUALLY! & NEW IN 2013!)
Electric assist start
New spring assist engine mounting bracket (2015)
When racing, the engine fits neatly beneath bespoke cabin steps onto hull moldings for inboard position. This means the weight distribution is correct for the hull design.
Electrics:
Complete rewire of boat in 2015
2 x switched Leocih MC2 Li-ion lithium 22Ah batteries (new 2015)
LED lighting throughout
LED masthead tri-colour light
LED forward & aft steaming lighits
8 way illuminated waterproof switch panel
USB charge pointTankage:
Custom inboard stainless steel 18 litre fuel tank (installed by fuel specialist with fuel system running to transom)
Fuel tank level gauge
Exterior fuel filling cap on deckRigging:
Z spars aluminium swept back, double spreader mast (new mast step 2015)
Z spars aluminium boom
Rod kicker
Carbon spinnaker pole with improved trip system
Designed by John Corby
Built in 2004
GRP hull deck & superstructure
Deep fin keel with a lead bulb
Spade rudder
Gelcoat finish on the topsides
Underwater profile stripped back, spray primed & hard racing antifouled in August 2016!Mechanics:
6hp Tahatsu long shaft outboard engine (SERVICED ANNUALLY! & NEW IN 2013!)
Electric assist start
New spring assist engine mounting bracket (2015)
When racing, the engine fits neatly beneath bespoke cabin steps onto hull moldings for inboard position. This means the weight distribution is correct for the hull design.
Electrics:
Complete rewire of boat in 2015
2 x switched Leocih MC2 Li-ion lithium 22Ah batteries (new 2015)
LED lighting throughout
LED masthead tri-colour light
LED forward & aft steaming lighits
8 way illuminated waterproof switch panel
USB charge pointTankage:
Custom inboard stainless steel 18 litre fuel tank (installed by fuel specialist with fuel system running to transom)
Fuel tank level gauge
Exterior fuel filling cap on deckRigging:
Z spars aluminium swept back, double spreader mast (new mast step 2015)
Z spars aluminium boom
Rod kicker
Carbon spinnaker pole with improved trip system
Cabon bow prodder and tack line fitted for A sail configuration
Dyform standing rigging (new 2015)
Spectra 24:1 backstay which leads to the main sheet position, with single line low friction rings & Harken cam cleats (new 2016)
Masthead backstay crane (new 2015)
Liros XTR jib halyard (new 2015)
Liros XTR jib sheets (new 2015)
Liros XTR spinnaker sheets (new 2015)
Slab reefing
Sails:
Most recent addition;
2016 LITE SKIN tri radial Technique Voile No.1 & No. 3 - (excellent condition including race sail bags)Mainsails;
2 x mainsails
Uk Mc Williams (re-cut 2016) reefing point added (2016)
Goacher battened Dacron with 2 reef points 2007Genoas;
LITE SKIN tri radial Technique Voile No.1 (2016)
LITE SKIN tri radial Technique Voile No. 3 (2016)
1 x UK Mc Williams No. 1 (2010)
1 x Dacron No. 1 (2007)
1 x Laminate No. 3 (2010)
1 x storm jib (unused)Spinnakers;
1 x heavy symmetrical kite
1 x light symmetrical kite
Dyform standing rigging (new 2015)
Spectra 24:1 backstay which leads to the main sheet position, with single line low friction rings & Harken cam cleats (new 2016)
Masthead backstay crane (new 2015)
Liros XTR jib halyard (new 2015)
Liros XTR jib sheets (new 2015)
Liros XTR spinnaker sheets (new 2015)
Slab reefing
Sails:
Most recent addition;
2016 LITE SKIN tri radial Technique Voile No.1 & No. 3 - (excellent condition including race sail bags)Mainsails;
2 x mainsails
Uk Mc Williams (re-cut 2016) reefing point added (2016)
Goacher battened Dacron with 2 reef points 2007Genoas;
LITE SKIN tri radial Technique Voile No.1 (2016)
LITE SKIN tri radial Technique Voile No. 3 (2016)
1 x UK Mc Williams No. 1 (2010)
1 x Dacron No. 1 (2007)
1 x Laminate No. 3 (2010)
1 x storm jib (unused)Spinnakers;
1 x heavy symmetrical kite
1 x light symmetrical kite
1 x medium weight asymmetrical (black) available if required by seperate negotiation
Spinnaker launch bagCockpit boom tent included for overnight comfort
Spinnaker launch bagCockpit boom tent included for overnight comfort