Back to the main page Back to category Sailboats
boat details
Wharram TaneNui Catermaran 27'6"
Estimated price for orientation: 0 $
Category: Sailboats
Class:
Description Condition: Used: An item that has been used previously. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition Year: My guess 1980s State: NSW Hull Material: Wood Length: 28 ft Brand: Wharram
This is a sailing catamaran, 28ft X 12ft approx. plywood construction, with a bridge deck between the original hulls and an added foam glass cabin superstructure mostly finished. It was previously converted to a "houseboat". Structurally it is good with crossbeams replaced. Fittings have been galvanized. May include a winch and hand pump It comes with a Light alloy mast and an outboard bracket. Damaged ply has been removed leaving 2 of 4" X 9" holes in the hull sides. The ply floor of the bridging cabin needs replacing, its supporting structure is OK. The Hulls should be glassed if it is to be left on a mooring. I did major work in the late 1990s. Stored now since then- obviously needs more workDesigners webpage https://www.wharram.com/site/catalog/study
Building Method:
Ply/Timber/Epoxy/Laminate Length Overall: 28' 3" 8.61 m Beam Overall: 12' 6" 3.18 m Waterline length: 23' 7" 7.18 m Draft: 1' 8" 0.50 m Weight: 2204 lbs 1000 kg Loading capacity: 2204 lbs 1000 kg Sail area: 310 sqft 28.8 sqm Building Time Estimate: 1000 hrs
YOU WILL HAVE TO REMOVE IT AT YOUR COST
May help arrange transport.
Contact me to arrange inspection inspection
Description
| Condition: | Used: An item that has been used previously. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab ... Read moreabout the condition | Year: | My guess 1980s |
| State: | NSW | Hull Material: | Wood |
| Length: | 28 ft | Brand: | Wharram |
This is a sailing catamaran, 28ft X 12ft approx. plywood construction, with a bridge deck between the original hulls and an added foam glass cabin superstructure mostly finished. It was previously converted to a "houseboat". Structurally it is good with crossbeams replaced. Fittings have been galvanized. May include a winch and hand pump It comes with a Light alloy mast and an outboard bracket. Damaged ply has been removed leaving 2 of 4" X 9" holes in the hull sides. The ply floor of the bridging cabin needs replacing, its supporting structure is OK. The Hulls should be glassed if it is to be left on a mooring. I did major work in the late 1990s. Stored now since then- obviously needs more workDesigners webpage https://www.wharram.com/site/catalog/study
Building Method:
YOU WILL HAVE TO REMOVE IT AT YOUR COST
May help arrange transport.
Contact me to arrange inspection inspection
Building Method:
| Ply/Timber/Epoxy/Laminate | ||
| Length Overall: | 28' 3" | 8.61 m |
| Beam Overall: | 12' 6" | 3.18 m |
| Waterline length: | 23' 7" | 7.18 m |
| Draft: | 1' 8" | 0.50 m |
| Weight: | 2204 lbs | 1000 kg |
| Loading capacity: | 2204 lbs | 1000 kg |
| Sail area: | 310 sqft | 28.8 sqm |
| Building Time Estimate: | 1000 hrs | |
May help arrange transport.
Contact me to arrange inspection inspection