Back to the main page Back to category Power Boats
boat details
Zodiac Mk3 GR inflatable boat
Estimated price for orientation: 102 $
Category: Power Boats
Class:
Description Manufacturer: Zodiac Length (Feet): 15.42 Type: Mk3 GR Trailer: Not Included
This is my Zodiac Mk3 GR inflatable boat and is 15.42 foot long. I bought it as a project and never got around to starting it.This a classic Zodiac design and still in production but this one is getting on a bit. The tubes are large diameter giving it plenty of buoyancy, the capacity is on the data plate shown in the photo.The floor is aluminium and wood and can be removed to allow the boat to be rolled up for storage or transport.I blew the boat up and it stayed firm for around 12 hours and 48 hours later at a comparable temperature the pressure is still around 75% (an internal application to each section of something like Sealskin maybe advisable). The good bits. All the valves are present and working properly. Each tube can be linked to the next for easy inflating or isolated when out on the water.All the rigging lines and fittings are present and secure.The drainage bungs are fitted.The top sides of the tubes are factory reinforced.The bad points. A couple of the rubber carrying handles are cracked and missing the corner of the mould. The tubes and floor are patched and some of the patches look like they could do with replacing. The tube seams (as in the photo) have never been taped and this might also be recommended. A rubber corner is missing from the stern floor board also as shown in the photo. Any questions just ask, viewing is possible and it will be collection only from Marske. Cash on collection or Paypal in advance.Many thanks
Description
| Manufacturer: | Zodiac | Length (Feet): | 15.42 |
| Type: | Mk3 GR | Trailer: | Not Included |
This is my Zodiac Mk3 GR inflatable boat and is 15.42 foot long. I bought it as a project and never got around to starting it.This a classic Zodiac design and still in production but this one is getting on a bit. The tubes are large diameter giving it plenty of buoyancy, the capacity is on the data plate shown in the photo.The floor is aluminium and wood and can be removed to allow the boat to be rolled up for storage or transport.I blew the boat up and it stayed firm for around 12 hours and 48 hours later at a comparable temperature the pressure is still around 75% (an internal application to each section of something like Sealskin maybe advisable).
The good bits. All the valves are present and working properly. Each tube can be linked to the next for easy inflating or isolated when out on the water.All the rigging lines and fittings are present and secure.The drainage bungs are fitted.The top sides of the tubes are factory reinforced.
Any questions just ask, viewing is possible and it will be collection only from Marske. Cash on collection or Paypal in advance.Many thanksThe bad points. A couple of the rubber carrying handles are cracked and missing the corner of the mould. The tubes and floor are patched and some of the patches look like they could do with replacing. The tube seams (as in the photo) have never been taped and this might also be recommended. A rubber corner is missing from the stern floor board also as shown in the photo.